Repair and Refurbishment of Rotating Equipment
Centrifugal Pumps
Complete overhauling of centrifugal pumps at FECC works
Dynamic Balancing of Pump rotors
Site-inspection and Troubleshooting
Non-Destructive Testing and inspection
Electrical run-out correction
Material built-up using Low temperature cold welding, Thermal spray, HVOF coating, Chrome plating, etc.
Casing repair
Hydrotesting of Pump casing
Installation and Commissioning including Alignment
OEM spare parts supply and support
FECC has expertise in overhauling / refurbishment of different types of centrifugal pumps including :
Cryogenic LNG pumps
Main-Injection pumps
Vacuum pumps
Sea Water lift pumps
Carbamate feed pumps
Boiler feed pumps
Main Oil Line pumps
Booster pumps
Centrifugal Compressors
Complete overhauling of Centrifugal Compressors at FECC works.
Dynamic Balancing of Compressor rotors
Site-inspection and Troubleshooting
Non-Destructive Testing and inspection
Electrical run-out correction
Material built-up using Low temperature cold welding, Thermal spray, HVOF coating, Chrome plating, etc.
Installation and Commissioning including Alignment
OEM spare parts supply and support
FECC has expertise in overhauling / refurbishment of different types of Centrifugal Compressors including:
Process Gas Compressors
Propane Compressors
Air Compressors
Booster Compressors.
….and many more
Blower
Visual Inspection and photographic reports
Dismantling of rotor.
Glass Bead Blasting of Blower Impeller.
Non-destructive testing and inspection
Built up of Seal Area and journal area by HVOF TC/Chromium Carbide coating.
Dynamic Balancing of Shaft.
Re-assembly of Blower Rotor.
Dynamic Balancing of Blower Rotor.
Applying Anti-Rust and Packing for Long Term Storage.
Steam Turbines / Gas Turbines
Complete overhauling of steam / gas turbines
Dynamic Balancing of Turbine rotors
Re-Blading, Blades refurbishment and replacement
Site-inspection and Troubleshooting
Non-Destructive Testing and inspection
Electrical run-out correction
Material built-up using Low temperature cold welding, Thermal spray, HVOF coating, Chrome plating, etc.
Installation and Commissioning Including Alignment
OEM spare parts supply and support
Fans
Visual Inspection and photographic reports.
Mechanical Run-out of Fan Rotor.
Dismantling of Fan Rotor, if needed.
Glass Bead Blasting of Fan
Non-destructive testing and inspection
Repair of Blades and Journal Areas on shaft.
Re-assembly of the Fan Rotor after repair.
Dynamic Balancing of Fan Rotor.
Turbochargers
Dismantling of Turbo Charges.
Visual Inspection and photographic reports.
Non-destructive testing and inspection
Replacement with new spares, if required
Glass Bead Blasting of Rotor.
Repair of Turbo Charger Rotor, if required.
Dynamic Balancing of Rotor.
Screw Compressors
Overhauling of Screw Compressor
Built-up and repair of Seal and Journal Areas on Screw Shafts by Coating/laser cladding.
Run-out checking of seal and journal areas after built-up.
Screw Profile repair.
Dynamic Balancing.
Compressor Casing Repair/welding and built-up.
Non-destructive testing and inspection
Inserting Screw Shafts in Casing and checking rotation of the shafts.